Here's why I think nobody should be without
this. -
You don't have to worry about the solder joints, they're top notch! -
The Peak Low Voltage feature is worth the cost. -
The accuracy is the best I've seen.
VoltMagic R/C System Monitor -
Battery Voltage Indication — 20 accurate range selections for the LEDs.
-
Peak Low Voltage (PLV) — Captures momentary low voltages hundreds of times per second.
-
Glitch and Failsafe Counting — Selectable
FM/PPM glitch or PCM Fail Safe counter.
- Warns you of trouble — It will
detect anything that might mess with the voltage at the receiver, such
as a bad switch or a bad connection.
-
Data Logger — PLV and Glitches/Fail
Safes, plays back even after power off.
You'll know what the low voltage was on your last flight and you'll know
whether you got glitches/hits even if you forget to check before you
turn the switch off.
- Application — Battery types: 4- or 5-cell NiMh/NiCd or
2S Lithium. Voltage regulators can also be monitored.
-
Connector — Universal (Futaba, JR, Z).
-
High Accuracy — Calibrated within 0.015 vdc.
User Interface
RED (blinking or solid) =
Warning, very low voltage.
YELLOW (blinking or solid) = Warning, voltage low.
GREEN blinking = Caution, glitch count or PLV near yellow warning.
GREEN solid = Normal.
Want more information? Check this link to Voltmagic's website
Are you having
trouble setting it up? Click
here. |
