| Part Number | Description | Qty | Remarks | |
| 0403-011 | Mast lock | 1 | ||
| 0403-085 | JJ-85 W-type wash-out control arm | 2 | ||
| 0404-011 | Starter pulley washer (for ENYA) | 1 | ||
| 0404-012 | Starter pulley washer (for YS,OS,61YS) | 1 | ||
| 0404-023 | Radius arm | 2 | ||
| 0404-034 | Clutch bell with gear | 1 | ||
| 0404-118 | EX cooling fan | 1 | ||
| 0404-402 | S-60 Starter coupling | 1 | with screw Bearing pressed | |
| 0404-403 | S-60 Starter shaft | 1 | S-60 Starter shaft not included | |
| 0404-514 | SX Starter pulley set | 1 | with taper collar | |
| 0404-515 | SX engine block (R,L) | 1 | ||
| 0404-531 | SX swash plate set | 1 | with pivot bolt | |
| 0404-616 | Drive auto-rotation | 1 | ||
| 0404-805 | SX Taper collar (for OS60) | 1 | ||
| 0414-062 | Clutch shoe with shaft | 1 | ||
| 0414-111 | DIA.10 Main must P=195 L=220 | 1 | DIA.10 Main must P=195L=220 not included | |
| 0414-112 | Wash-out block set | 1 | Slide, radius block | |
| 0414-113 | Main gear 95T | 1 | ||
| 0414-114 | Second gear 86T | 1 | with collar and screw | |
| 0414-115 | Auto-rotation case | 1 | with screw | |
| 2500-047 | Brg. DIA.12Ｘ DIA.21ｘ5ＺＺ | 2 | ||
| 2500-048 | Brg. DIA.12Ｘ DIA.16L one way | 1 | ||
| 2500-049 | Brg. DIA.10Ｘ DIA.19ｘ5ＺＺ | 2 | ||
| 2500-066 | Brg. DIA.6Ｘ DIA.19ｘ6ＺＺ | 2 | ||
| 2500-072 | Brg. DIA.3Ｘ DIA.7ｘ3FZZ | 2 | ||
| 2505-001 | M2 nut | 20 | ||
| 2506-014 | FW DIA. hardened | 5 | ||
| 2506-019 | FW DIA.3Ｘ DIA.4.5ｘ0.5T | 10 | ||
| 2509-003 | needle pin DIA.2ｘ11.8 | 2 | ||
| 2521-053 | C DIA.3Ｘ DIA.5ｘ4.1 | 2 | ||
| 2521-084 | C DIA.4Ｘ DIA.5ｘ4.5S | 2 | ||
| 2525-002 | Ex DIA.5 ball | 5 | with M2x6CS | |
| 2529-008 | O ribg SS060 | 5 | ||
| 2530-004 | Pivot bolt DIA.5ｘ5ｘＭ3 | 2 | ||
| 2530-005 | Pivot bolt(Ｅ) DIA.5ｘ7ｘＭ4 | 2 | ||
| 2531-004 | M4x4SS | 10 | ||
| 2532-002 | M3x8CS | 10 | ||
| 2532-004 | M3x12CS | 10 | ||
| 2532-021 | M4x10CS | 10 | ||
| 2532-022 | M4x15CS | 10 | ||
| 2532-028 | M2x8CS | 10 | ||
| 2532-031 | M2x6CS | 10 | ||
| 2532-034 | M3x5CS | 10 | ||
| 2537-001 | M2.6x10TS-2 | 10 | ||
| 2538-008 | M3x8 countersunk screw | 10 | with washer | |
| 2539-020 | M4x14 bottom bolt | 2 |