Ball Link Duplicator...make your own.

This is how I make my link duplicator. Check your spare parts box. You probably have most of the components already. The main shaft doesn't have to be perfectly straight. Any collars will do. The one at the end should be fixed tightly to the shaft. The other one is free to move and can be locked down. You'll have to do just a little grinding on the moving collar so the shank on the ball doesn't touch the shaft.

Image

Prices are subject to change without notice

Copyright © 2010 Ron Lund, RONLUND.COM and Ron's Heliproz South All rights reserved

Valid XHTML 1.0 Transitional