DFC UPGRADE KITS DO NOT INCLUDE BLADE GRIPS, BLADE AXLES, SWASHPLATES OR THRUST BEARINGS.
If you don't have one of the newest kits, chances are you will need to buy blade grips. Blade Axle, Thrust Bearings and Swashplate are compatible. All EFL Pro V2 and later models have the correct blade grips for the conversion. Included Main Shaft is for the 600E PRO models only, make sure you get the proper Main Shaft for your model
If you convert to DFC, you will need a stronger regulator. Consider using a SwitchGlo and an LiFe pack plugged directly into the receiver. Be sure your servos are good for 6V and you use a step down regulator to the rudder servo. The reason for this is because flybarless models use almost twice as much current and flybar models.
H60239A - 600DFC MAIN ROTOR HEAD UPGRADE SET
In your basket:None
3 IN STOCK
- Head block
- Jesus Bolt
- Pitch Arms
- Main Shaft for 600EFL Pro only.
- 2 - 5mm Ball Link for 2.5mm rod (700 Elevator)
- 2 - Balls 5mm Diameter. Threads: 3mm x 3.5mm Overall Length: 8.5mm (These go on the swashplate)
- 2 - DFC rods. Threads: 2.85 x 6mm Overall Length: 19.3mm
- Necessary Hardware