SCORPION 12-CELL 130 AMP SERIES V HV SPEED CONTROLLER WITH BEC

None

$349.99

Wait List

SC-COM130A-ESC

Weight (Without Connectors) ..................... 200 gm (7.05 oz)
Max Continuous Current ...................................... 130 Amps
Operating Voltage Range ................................ 12 to 50 Volts
Max BEC Output ............ 15 Amps peak @ 5.4 - 7.4 V
On Resistance ..................................... 0.68 mOhms
Size ............ 89 x 43 x 25.5mm (3.5 x 1.69 x 1.00 in)
Low Voltage Cut-off: Settable from 12V to 48V in 1.0V increments. No need to select battery type, just set the voltage the ESC should cut off at. By doing this, the ESC will be compatible with any battery chemistry, including future types of battery designs.

>BRK=Brake Settable to 5 different levels: 1=No Brake, 2=Very Soft Brake, 3=Soft Brake, 4=Hard Brake, 5=Very Hard Brake

AIR=Aircraft Mode 1=Airplane Mode, 2=External Governor Mode

PCT=Program Cut-off Type for LVC 1=50% power reduction, 2=LED Warning, no power cut, 3=Power Pulse Warning

MAT=Motor Acceleration Time Delay 1=0.15 seconds, 2=0.3 seconds, 3=0.45 seconds, 4=0.7 seconds and 5=1.3 seconds

COP=Current Overload Protection 1=Protection on, 2=Protection off. (Selecting option 2 will void the ESC warranty)

FREQ=PWM Frequency Currently fixed at 8 KHz and not changable

SS=Soft Start Mode 1=Soft Start without Governor mode, 2=Soft Start with Governor

TIM=Motor Timing Angle 1=Automatic Timing, 2=5 degrees, 3=15 degrees, 4=20 degrees, 5=25 degrees and 6=30 degrees

GOV or P Gain=Governor Power Gain Settable from 1 to 11 (softest to hardest), Default is 5

SB or I Gain=Governor Current Gain Settable from 1 to 8 (least sensitive to most sensitive), Default is 5

1 - Scorpion Commander Series V 50 Volt 130 Amp ESC

1 - Scorpion IR Programming Card

1 - Scorpion IR Receiver Module

1 - Instruction Manual