Home > R/C Helicopter Kits and Parts > Miniature Aircraft USA > Miniature Aircraft Kits

Not made in China

I love this machine. It flies like a much larger model. I think one of the things I like most is that it just does what I tell it to do. There's no hesitation, no complaining. Just Do It

Below is a picture of my personal Fury. The canopy was painted by Scott Milton at Ace Heli. You can see the stock canopy at the bottom of the page.

It is made in the USA

MA1028 - FURY 55 MINIATURE NITRO KIT

In your basket:

None

Price:

$629.99

Code: MA1028

1 IN STOCK

Fury 55 Features:

Chassis

• Sturdy Graphite Main Frame Unit
• Simple Construction
• Molded Fuel Tank 15.5 oz (Easy Removal)
• CNC Aluminum Bearing Blocks
• CNC Delrin Machined Main Gear w/Autorotation
• True T6-6061 Aluminum Components
• Quality Bearings Used Throughout
• CNC Aluminum Tail Drive Pulleys
• Elevated C.G. (Center of Gravity)
• Hardened Main Shaft (10mm)
• High Efficiency Cooling System
• Aluminum Fan
• Split-Style Pre-Aligning Aluminum Fan Hub
• Simple Motor Removal/Installation
• Direct Controlled 120° CCPM
• Aluminum Boom Clamps
• Hex Start Adaptor

Rotor Head :

• Full Ball Bearings/Thrust Bearings
• Heavy Duty Hiller Rods
• High-Ratio Flybar System
• Dual Controlled CNC Flybar Cage
• 8mm Head Axle
• CNC Machined Aluminum Swashplate
• Hex/Hardened Control Ball
• CNC Aluminum Head Button
• Reinforced Molded Blade Grips
• High Quality Swashplate Heim Ball/Ball Bearing

Tail Rotor

• Full Ball Bearings
• Graphite Tail Fin
• Secure CNC Aluminum Tail Rotor Clamps
• 22mm Lightweight Aluminum Tail Boom
• Positive Control System
• 2mm Control Rod
• Hardened Tail Rotor Output Shaft
• Carbon/Aluminum Boom Supports

Painted Canopy Included

• High Visibility Painted Epoxy-Glass Canopy by CanoMOD™

Model Specifications:

• Length: 47.875" - 1216mm
• Height: 16.625" - 422mm
• Rotor Span: 1365-1405mm - 600-620mm Blades
• Tail Rotor Span: 260mm - 95mm Blades
• Avg. Kit contents Weight: 5.4lbs - 2.45kg (includes painted canopy)
• Avg. Ready-to-Fly Weight: 7.3-7.5lbs - 3.31-3.4kg (less fuel)
• Main Drive Ratio: 8.538:1
• Tail Drive Ratio: 4.61:1
• Bearings: 4-Thrust Bearings, 1-German Heim Ball, 38-Ball Bearings, 2-Torrington One-way Clutch Bearings

Photos:


The swashplate control system is direct driven from the servos in a 3 point arrangement.	Anti-rotation guide is easily removed/replaced to simplify swashplate removal. Swashplate guide is hardened steel design.

New lighter swashplate design will provide hours of trouble free operation	One piece upper clutch support and hex start cone

Throttle servo mounts forward of the motor for direct throttle control	Fan shroud is captured by chassis for simple installation. Electronics on/off switch is easily accessible on the frame front.