Tips

Be sure to look at the FAQ page.

Align starter shaft fix

Two tips for the T-rex 500

Is your YS engine getting hard to start?

I had my gyro set up so it didn't wag, now it's started wagging but the model still runs smooth.

Keep your Velcro stuck on the battery tray

Get a good seal on your muffler

Why your needles might be different from the pro's

Problems with your new YS61ST running lean

Setting up yourthrottle

Buying Used Equipment

Fail Safe Settings

Link Duplicator

Receiver antennas

An easy way to put After Run Oil in your engine...not for the guy who's afraid of drilling holes in his engine.

Learning autorotations

Copyright © 2010 Ron Lund, RONLUND.COM and Ron's Heliproz South All rights reserved